Headgear/Facemask
Headgear is often used to correct an excessive overbite. This is done by placing pressure against the upper teeth and jaw, which would hold the teeth in position or help move them into better positions. The severity of the problem determines the length of time headgear needs to be worn. The key to success with your headgear appliance is consistency. Headgear must be worn a certain number of hours per day, and if not, it must be made up the following day.
Headgear should never be worn while playing sports and should also be removed while eating or brushing your teeth.
In some cases where an underbite is present, we may recommend using reverse headgear (face mask) as part of the treatment plan. This appliance is designed to fix the discrepancy between your upper and lower jaws by moving the upper jaw forward to correct the malocclusion.
For the results to be successful, patient compliance is of the utmost importance. It may take several days to become accustomed to the appliance. With practice, it will become easier to place and remove the reverse headgear. We will determine the length of time you should wear your headgear, but it is generally 10-14 hours per day, which can include wearing while you sleep. You should not wear your headgear while participating in sporting activities.
Sometimes your chin may get irritated from the headgear. If this happens, you should always keep the area clean and often change the insert in the chin cup. If the skin becomes very dry, the use of moisturizing cream twice a day can be helpful. If your jaw joints are extremely sore or you cannot open and close your mouth without difficulty, stop wearing the appliance and contact us for further instructions as we may need to fit you with a different appliance. Also, if your headgear breaks or is bent, call us so we can fit you in with a repair appointment so your treatment will not be delayed.
Back to the top
Thumb/Finger Appliance
Sucking is a natural reflex that relaxes and comforts babies and toddlers. Children usually cease thumb sucking when the permanent front teeth are ready to erupt. Typically, children stop between the ages of 2 and 4 years. Thumb sucking that persists beyond the eruption of primary teeth can cause improper growth of the mouth and misalignment of the teeth. If you notice prolonged and/or vigorous thumb sucking behavior in your child, talk to your dentist.
One solution to thumb sucking is an appliance called a "fixed palatal crib." This appliance is put on the child's upper teeth by an orthodontist. It’s placed behind on the upper teeth on the roof of the mouth. The crib consists of semicircular stainless steel wires that are fastened to molars using steel bands. The stainless steel wires fit behind the child's upper front teeth, and they are barely visible. The crib usually stops the habit of thumb sucking within the first day of use.
Back to the top
Tongue Thrusting Appliance
Tongue thrusting occurs when the patient presses his or her tongue against the front teeth, usually when swallowing, speaking or resting the tongue. If thrusting is constant, this can cause problems with teeth alignment and must be fixed.
We prefer to correct tongue thrusting by giving patients a tongue thrusting appliance. This appliance, similar to a mouth guard, is usually worn at night. Other times, a more permanent appliance is prescribed and can be only be adjusted by our office.
Back to the top
Bite Fixers
In situations where the teeth overlap to such a degree that the edges of the lower front teeth actually bite into the hard palate, orthodontists recommend the bite plate appliance, a removable device that looks like a conventional retainer in most cases. A bite plate appliance is worn full-time (except when eating and brushing) for six months to a year.
Correcting a deep bite as early as possible will favorably affect long-term stability and eliminate unnecessary pain, discomfort, ulcers, etc. When growth is modified while a person is still growing, the change becomes more permanent. One of the first things to relapse in a finished orthodontic case is the overbite. Thus, correcting a severe overbite is one of the first important corrections that needs to be made while growth is still occurring.
Others appliances also operate as Bite Fixers for various problems that may require attention!
Back to the top
Orthognathic Appliances
An orthognathic appliance, or growth appliance, is used to correct discrepancies in the growth patterns of the jaws and/or cleft palate. There are a number of different growth appliances available to correct these problems. Certain appliances are designed to gently encourage the upper palate to expand allowing for more room for the permanent teeth to grow in, while others are designed to correct overbites that occur due to growth problems. Orthognathic (growth) appliances are designed to create more room for incoming permanent teeth, promote a better bite and/or enhance the facial profile. They are sometimes used for less complex cases that do not require orthognathic surgery.
Back to the top